S'inscrire | Se connecter | FAQ      [?] 

Machining Science and Technology

Articles from the last few issues of Machining Science and Technology © Taylor and Francis Ltd
  • NANOSTRUCTURED CUTTING TOOLS COATINGS FOR MACHINING TITANIUM
    Machining Science and Technology, Vol. 12, No. 2. (April 2008), pp. 158-169.
    by Settineri, Luca, Faga, Maria Giulia
  • DESIGN AND MANUFACTURE OF STRAIGHT BEVEL GEAR FOR PRECISION FORGING DIE BY DIRECT MILLING
    Machining Science and Technology, Vol. 12, No. 2. (April 2008), pp. 170-182.
    by Kawasaki, , Shinma,
  • ANALYSIS OF THE DISC DRESSING EFFECTS ON GRINDING PERFORMANCEPART 1: SIMULATION OF THE DISC DRESSED WHEEL SURFACE
    Machining Science and Technology, Vol. 12, No. 2. (April 2008), pp. 183-196.
    by Baseri, , Rezaei, , Rahimi, , Saadat,
  • ANALYSIS OF THE DISC DRESSING EFFECTS ON GRINDING PERFORMANCEPART 2: EFFECTS OF THE WHEEL TOPOGRAPHICAL PARAMETERS ON THE SPECIFIC ENERGY AND WORKPIECE SURFACE ROUGHNESS
    Machining Science and Technology, Vol. 12, No. 2. (April 2008), pp. 197-213.
    by Baseri, , Rezaei, , Rahimi, , Saadat,
  • MACHINABILITY OF AI/SiC PARTICULATE METAL-MATRIX COMPOSITES UNDER DRY CONDITIONS WITH CVD DIAMOND-COATED CARBIDE TOOLS
    Machining Science and Technology, Vol. 12, No. 2. (April 2008), pp. 214-233.
    by Kremer, , Devillez, , Dominiak, , Dudzinski, , El Mansori,
  • ENHANCEMENT OF SURFACE QUALITY AND TRIBOLOGICAL PROPERTIES USING BALL BURNISHING PROCESS
    Machining Science and Technology, Vol. 12, No. 2. (April 2008), pp. 234-248.
    by El-Tayeb, , Low, , Brevern,
  • MACHINING STUDIES ON BIMETALLIC PISTONS WITH CBN TOOL USING THE TAGUCHI METHOD - TECHNICAL COMMUNICATION
    Machining Science and Technology, Vol. 12, No. 2. (April 2008), pp. 249-255.
    by Uthayakumar, , Prabhaharan, , Aravindan, , Sivaprasad,
  • INVESTIGATION OF SIZE-EFFECTS IN MACHINING WITH GEOMETRICALLY DEFINED CUTTING EDGES
    Machining Science and Technology, Vol. 11, No. 4. (October 2007), pp. 447-473.
    by Weber, , Hochrainer, , Gumbsch, , Autenrieth, , Delonnoy, , Schulze, , Lohe, , Kotschenreuther, , Fleischer,
  • FLUID MECHANICS APPROACH TO MACHINING AT HIGH SPEEDS: PART I: JUSTIFICATION OF POTENTIAL FLOW MODELS
    Machining Science and Technology, Vol. 11, No. 4. (October 2007), pp. 475-489.
    by Kazban, , Mason,
  • FLUID MECHANICS APPROACH TO MACHINING AT HIGH SPEEDS: PART II: A POTENTIAL FLOW MODEL
    Machining Science and Technology, Vol. 11, No. 4. (October 2007), pp. 491-514.
    by Kazban, , Mason,
  • MOLECULAR APPROACH TO MATERIAL DETACHMENT MECHANISM DURING CHEMICAL MECHANICAL PLANARIZATION
    Machining Science and Technology, Vol. 11, No. 4. (October 2007), pp. 515-530.
    by Zhang, Ruqin, Wang, Xiaoping, Shrotriya, Pranav, Biswas, Rana, Bastawros, Ashraf, Chandra, Abhijit
  • COMPARISON OF MACHINED SURFACE QUALITY OBTAINED BY HIGH-SPEED MACHINING AND CONVENTIONAL TURNING
    Machining Science and Technology, Vol. 11, No. 4. (October 2007), pp. 531-551.
    by Ekinovic, Sabahudin, Begovic, Edin, Silajdzija, Amira
  • THE EFFECT OF THE CUTTING FLUID ON SURFACE ROUGHNESS IN BORING OF LOW CARBON STEEL-TECHNICAL COMMUNICATION
    Machining Science and Technology, Vol. 11, No. 4. (October 2007), pp. 553-560.
    by Yildiz, , Gunay, , Seker,
  • FEM INVESTIGATION FOR ORTHOGONAL CUTTING PROCESS WITH GROOVED TOOLS-TECHNICAL COMMUNICATION
    Machining Science and Technology, Vol. 11, No. 4. (October 2007), pp. 561-572.
    by Fang, , Zeng,
  • A FINITE ELEMENT ANALYSIS OF BURR FORMATION IN FACE MILLING OF A CAST ALUMINUM ALLOY
    Machining Science and Technology, Vol. 11, No. 2. (April 2007), pp. 157-181.
    by Sartkulvanich, Partchapol, Sahlan, Hakan, Altan, Taylan
  • OPTIMIZATION STUDIES ON HOLE-MAKING TOOLS FOR HIGH-PERFORMANCE CUTTING AUSTENITIC STAINLESS STEEL
    Machining Science and Technology, Vol. 11, No. 2. (April 2007), pp. 183-200.
    by Chen, Ming, Liu, Gang, Zhang, Xiao-Hui
  • MODELLING OF DISC DRESSING FORCES
    Machining Science and Technology, Vol. 11, No. 2. (April 2007), pp. 201-216.
    by Baseri, , Rezaei, , Rahimi, , Rezaeian,
  • AN ENERGY ANALYSIS OF BELT POLISHING PROCESS AND ITS APPLICATIONS TO TIME CYCLE AND TRACKING EFFECTS
    Machining Science and Technology, Vol. 11, No. 2. (April 2007), pp. 217-234.
    by Sura, Edoardo, Mansori, Mohamed El, Ghidossi, Patrick, Deblaise, Stephane, Negro, Tommaso Dal, Khanfir, Hatem
  • OPTIMIZATION OF ELECTRO-CHEMICAL MACHINING PROCESS PARAMETERS USING GENETIC ALGORITHMS
    Machining Science and Technology, Vol. 11, No. 2. (April 2007), pp. 235-258.
    by Jain, , Jain,
  • ON CUMULATIVE DEPTH OF TOUCH-DRESSING OF SINGLE LAYER BRAZED cBN WHEELS WITH REGULAR GRIT DISTRIBUTION PATTERN
    Machining Science and Technology, Vol. 11, No. 2. (April 2007), pp. 259-270.
    by Ghosh, , Chattopadhyay,
  • SURFACE ROUGHNESS PREDICTION USING HYBRID NEURAL NETWORKS
    Machining Science and Technology, Vol. 11, No. 2. (April 2007), pp. 271-286.
    by Jesuthanam, , Kumanan, , Asokan,
  • VALIDATION OF PREDICTIVE AXIS CONTROL STRUCTURE WITHIN A VIRTUAL OPEN ARCHITECTURE MACHINE TOOL
    Machining Science and Technology, Vol. 10, No. 4. (December 2006), pp. 389-415.
    by Susanu, Mara, Dumur, Didier
  • OPTIMAL MACHINING CONDITIONS FOR TURNING OF PARTICULATE METAL MATRIX COMPOSITES USING TAGUCHI AND RESPONSE SURFACE METHODOLOGIES
    Machining Science and Technology, Vol. 10, No. 4. (December 2006), pp. 417-433.
    by Palanikumar, , Karthikeyan,
  • FORCE ANALYSIS FOR GRINDING WITH SEGMENTAL WHEELS
    Machining Science and Technology, Vol. 10, No. 4. (December 2006), pp. 435-455.
    by Fan, Xiaorui, Miller, H Michele
  • A SKILL-FORMATION MODEL FOR GRINDING OPERATIONS
    Machining Science and Technology, Vol. 10, No. 4. (December 2006), pp. 457-470.
    by Sakakura, Moriaki, Tsukamoto, Shinya, Fujiwara, Takanori, Inasaki, Ichiro
  • MACHINING PARAMETERS OPTIMIZATION FOR ALUMINA BASED CERAMIC CUTTING TOOLS USING GENETIC ALGORITHM
    Machining Science and Technology, Vol. 10, No. 4. (December 2006), pp. 471-489.
    by Kumar, A Senthil, Khan, M Adam, Thiraviam, , Sornakumar,
  • MULTI-OBJECTIVE OPTIMIZATION OF ABRASIVE FLOW MACHINING PROCESSES USING POLYNOMIAL NEURAL NETWORKS AND GENETIC ALGORITHMS
    Machining Science and Technology, Vol. 10, No. 4. (December 2006), pp. 491-510.
    by Ali-Tavoli, , Nariman-Zadeh, , Khakhali, , Mehran,
  • GRINDING WHEEL CONDITION MONITORING WITH HIDDEN MARKOV MODEL-BASED CLUSTERING METHODS
    Machining Science and Technology, Vol. 10, No. 4. (December 2006), pp. 511-538.
    by Liao, T Warren, Hua, Guogang, Qu, , Blau,
  • MODIFICATION OF GEOMETRY AND TECHNOLOGY OF CYLINDRICAL WORMS
    Machining Science and Technology, Vol. 10, No. 4. (December 2006), pp. 539-547.
    by Abu Shreehah, A Tareq, Abdullah, A Rasheed
  • INFLUENCE OF MATERIAL REMOVAL ON THE DYNAMIC BEHAVIOR OF THIN-WALLED STRUCTURES IN PERIPHERAL MILLING
    Machining Science and Technology, Vol. 10, No. 3. (September 2006), pp. 275-287.
    by Thevenot, , Arnaud, , Dessein, , Cazenavelarroche,
  • STUDY ON NEAR DRY CUTTING OF ALUMINUM ALLOYS
    Machining Science and Technology, Vol. 10, No. 3. (September 2006), pp. 289-299.
    by Yoshimura, Hiromi, Toda, Yoshikazu, Moriwaki, Toshimichi, Shibasaka, Toshiro, Okida, Junya
  • ROTARY ULTRASONIC MACHINING OF TITANIUM ALLOY: EFFECTS OF MACHINING VARIABLES
    Machining Science and Technology, Vol. 10, No. 3. (September 2006), pp. 301-321.
    by Churi, , Pei, , Treadwell,
  • AN EXPERIMENTAL ANALYSIS OF MAGNETIC ABRASIVES FINISHING OF PLANE SURFACES
    Machining Science and Technology, Vol. 10, No. 3. (September 2006), pp. 323-340.
    by Girma, Berhanu, Joshi, Suhas, Raghuram, , Balasubramaniam,
  • ABRASIVE FLOW MACHINING WITH ADDITIONAL CENTRIFUGAL FORCE APPLIED TO THE MEDIA
    Machining Science and Technology, Vol. 10, No. 3. (September 2006), pp. 341-354.
    by Walia, , Shan, , Kumar,
  • EFFECTS OF COOLANT SUPPLY METHODS AND CUTTING CONDITIONS ON TOOL LIFE IN END MILLING TITANIUM ALLOY
    Machining Science and Technology, Vol. 10, No. 3. (September 2006), pp. 355-370.
    by Sun, , Wong, , Rahman, , Wang, , Neo, , Tan, , Onozuka,
  • A SLIPLINE FIELD ANALYSIS OF FREE-CHIP ORTHOGONAL MACHINING WITH ADHESION FRICTION AT RAKE FACE
    Machining Science and Technology, Vol. 10, No. 3. (September 2006), pp. 371-387.
    by Das, , Dundur,
  • FORCES AND TEMPERATURES IN HARD TURNING
    Machining Science and Technology, Vol. 10, No. 2. (June 2006), pp. 157-179.
    by Lazoglu, , Buyukhatipoglu, , Kratz, , Klocke,
  • HSM-ADAPTED TOOL PATH CALCULATION FOR POCKETING
    Machining Science and Technology, Vol. 10, No. 2. (June 2006), pp. 181-196.
    by Pateloup, Vincent, Chanal, Helene, Duc, Emmanuel, Ray, Pascal
  • IMPROVING FATIGUE STRENGTH OF METALS USING ABRASIVE WATERJET PEENING
    Machining Science and Technology, Vol. 10, No. 2. (June 2006), pp. 197-218.
    by Arola, , Alade, , Weber,
  • A GRINDING-BASED MANUFACTURING METHOD FOR SILICON WAFERS: GENERATION MECHANISMS OF CENTRAL BUMPS ON GROUND WAFERS
    Machining Science and Technology, Vol. 10, No. 2. (June 2006), pp. 219-233.
    by Sun, Wangping, Pei, , Fisher, Graham
  • AN EXPERIMENTAL INVESTIGATION ON WEAR ASPECTS OF TAPPING OPERATION ON HARDENED STEELS
    Machining Science and Technology, Vol. 10, No. 2. (June 2006), pp. 235-250.
    by Coelho, Reginaldo Teixeira, Arai, Ricardo, Watanuki, Hugo Martinelli, Borges, Emanuel
  • IMPULSIVE CHIP BREAKING IN METAL MACHINING: A PROOF-OF-CONCEPT STUDY
    Machining Science and Technology, Vol. 10, No. 2. (June 2006), pp. 251-262.
    by Fang, , Wu,
  • SENSORLESS DETECTION OF TOOL BREAKAGE IN MILLING
    Machining Science and Technology, Vol. 10, No. 2. (June 2006), pp. 263-274.
    by Alaniz-Lumbreras, Pedro Daniel, Gomez-Loenzo, Roberto Augusto, Romero-Troncoso, Rene de Jesus, Peniche-Vera, Rebeca D Rocio, Jauregui-Correa, Juan Carlos, Herrera-Ruiz, Gilberto
  • SPECIAL ISSUE ON ENVIRONMENTAL ISSUES IN MACHINING'
    Machining Science and Technology, Vol. 10, No. 1. (2006), pp. 1-2.
    by Stevenson, Robin
  • MINIMUM QUANTITY LUBRICATION (MQL) APPLICATIONS IN AUTOMOTIVE POWER-TRAIN MACHINING
    Machining Science and Technology, Vol. 10, No. 1. (2006), pp. 3-22.
    by Filipovic, Aleksandar, Stephenson, David
  • EXAMINING THE ROLE OF CUTTING FLUIDS IN MACHINING AND EFFORTS TO ADDRESS ASSOCIATED ENVIRONMENTAL/HEALTH CONCERNS
    Machining Science and Technology, Vol. 10, No. 1. (2006), pp. 23-58.
    by Adler, , Hii, -S, Michalek, , Sutherland,
  • TRIBOLOGICAL ACTION AND OPTIMAL PERFORMANCE: RESEARCH ACTIVITIES REGARDING MQL MACHINING FLUIDS
    Machining Science and Technology, Vol. 10, No. 1. (2006), pp. 59-85.
    by Wakabayashi, Toshiaki, Inasaki, Ichiro, Suda, Satoshi
  • ENVIRONMENTALLY CONSCIOUS MACHINING AND GRINDING WITH CRYOGENIC COOLING
    Machining Science and Technology, Vol. 10, No. 1. (2006), pp. 87-131.
    by Paul, , Chattopadhyay,
  • LUBRICATION MECHANISMS OF LN2 IN ECOLOGICAL CRYOGENIC MACHINING
    Machining Science and Technology, Vol. 10, No. 1. (2006), pp. 133-155.
    by Hong, Shane
    • Remarque: pour citer cette page, utilisez l'url suivante: http://www.citeulike.org/journal/tandf-lmst

    RIS BibTeX
    CiteULike organises scholarly (or academic) papers or literature and provides bibliographic (which means it makes bibliographies) for universities and higher education establishments. It helps undergraduates and postgraduates. People studying for PhDs or in postdoctoral (postdoc) positions. The service is similar in scope to EndNote or RefWorks or any other reference manager like BibTeX, but it is a social bookmarking service for scientists and humanities researchers.